Power Pulse 402AC/DC is an Heavy Duty professional Multifunction 3 Phase Inverter Power Source with separated wire feeder WF104 – WF108. The MIG / MAG Modes available are: Manual, Synergic, Pulsed Synergic and Double Pulsed Synergic. The available MIG / MAG mode are: MMA, TIG AC/DC HFand GOUGING, cutting processes are also available.
The MIG MAG weldingis here optimized thanks to:
Pulsato HS, Pulsato HC, Power Focus, Power Root
The TIG AC welding is here optimized thanks to:
Extra Fusion, MIX AC/DC
The TIG DC welding is here optimized thanks to:
TIG PULS up to a 2,5Khz, TIG PULS SYN, Dynamic Arc, Q-Start, Multi-Tack, Q-Spot
The new Pulsed HC (High Control) has the characteristic of having a very fast arc control in order to optimize the detachment of the drop with a very reduced energy.
The special function Power Focus has been designed to cut total welding costs, reducing the total number of joints to be welded.
The special Power Root function is a short arc transfer, controlled with a cold drop which ensures a very high quality during the root passes.
Higher execution speed
Higher deposition rate
Lower heat input and less plastic deformation
Better mechanical properties
Higher penetration, offers lower risk of lack of fusion
Lower production costs and depreciation
Pre-set balanced parameters, stored in the Synergic Pulse TIG DC SYN curve, simplify Pulsed welding by adjusting only welding current.
The pulse TIG with frequency until 2500Hz allows to weld very thin materials with easy arc control and very low heat input on workpiece.
The Q START (Quick Start) function facilitates joining of the parts in the initial stage of the welding process.
On activating this function the machine automatically switches to Synergic pulsed mode for a preset time. The resulting pulses create movement of the molten metal on the two sheet metal edges thereby accelerating formation of the join.This function is invaluable in the case of seams with slight openings or with irregular preparation. The duration of the series of pulses can be adjusted, (from 0.1 to 60 second) depending on the thickness and shape of the sheet to be welded.
The MULTITACK system makes it possible to reduce heat output while joining two light gauge parts. The series of arc strikes at short time intervals allows the material to cool during the pause between one strike and the next and thus minimize its deformation. The facility to adjust the frequency of the series of arc strikes in the time unit makes it possible to adapt the electric arc to the welding speed and the joint geometry.
The DYNAMIC ARC function makes it possible to keep the product of Voltage x Current constant. The power source increases the welding current as the arc voltage decreases and reduces the welding current if the arc voltage increases.
The Q-SPOT (Quick Spot) function makes it possible to minimise tacking times for light gauge sheet metal. The operator conveniently places the tungsten electrode on the fixing point, thereby obtaining perfect control of the position of the join. Once the electrode has been lifted the machine emits a very high intensity welding current pulse with a very short preset time (from 0.01 Sec to 10 Sec). The pulse time varies depending on the type of sheet metal to be joined. In this way the welded point closes instantly with minimum heat transfer, leaving the metal white, clean and almost cold.
This makes it possible to create a highly penetrative and precise fusion bath so that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC – TIG welding.
This allows to obtain high welding speed and creating the weld puddle rapidly on a cold workpiece.
Power Pulse 402AC/DC
WF104
Wheels Kit WF
Trolley L
Kit twin bottles
VP01
Power Pulse 402AC/DC
WF108
Wheels Kit WF
Trolley L
Kit twin bottles
VP01
Power Pulse 402AC/DC
WF104
Wheels Kit WF
Trolley L
Kit twin bottles
CU09
Power Pulse 402AC/DC
WF104
Wheels Kit WF
Trolley L
Kit twin bottles
CU09