PLASMA CUT power source

Voyager 75 Basic

Voyager 75 Basic is an innovative power source with high performances to cut plasma, in a very compact and light machine body.

It allows precision cutting up to 25mm and separation cutting up to 30mm. In just 17,8kg.

Voyager 75 Basic owns following processes: MANUAL CUT and GOUGING. In addition, it is possible to take advantage of GRID mode to facilitate the cut of grated panels.

Thanks to the BASIC front panel, you can access the cutting parameters very quickly. Suitable for use on site with hard working conditions.

The flexibility of the EASY FIT system of the supplied torch allows very easy management of both the length of the torch cable (max two 6-metre cables in series, for a total of 12 metres) and the cutting or gouging geometry.

The POWER LIMIT mode allows you to set the nominal power available from external sources (for example a power generator) in order to optimize absorption protecting the Plasma power source and making it work to its maximum potential.

Weco original spare parts guarantee the best cutting result and the longest life of the spare parts themselves. Available in all sizes, in blister pack for single item or in starter kit box for a practical restocking.

Technological innovation

Technical features

VOYAGER 75 BASIC


3x400Vac ± 15% @ 50-60Hz
16A
		PLASMA
	50%		100%
	70A		55A
		10A – 70A
270V
9,3kVA – 8,7kW
23
533 x 214 x 368mm
17,8Kg

PLASMA CUT power source

Voyager 75 Basic

Technological innovation

Digital Control

Technical features

Configurations

PROCESS

MATERIAL

NEWSLETTER

Torcia Plasma Wecut105Taglio manuale 75°

Torcia Plasma Wecut105L130cm, taglio manuale 90°

Cavo coassiale Easyfit 6mtCollegabile in serie con un altro da 6mt per un totale di 12mt

FlatWecut, per taglio orizzontalePratica cartuccia preassemblata in un unico pezzoDisponibile nelle taglie 40-70A e 85-105A

Kit AironWecutPer tagli in zone difficilmente raggiungibili.Pratica cartuccia con ricambi disponibili nelle taglie 20-45A, 70A e 100A

Trolley 02

Kit bevel toolPer tagli obliqui, cianfrinatura e tagli circolari

Compasso

Starter kit consumabili, disponibile in due taglie

45-70A

85-105A

Ricambi torcia taglio manuale45A – 70A – 85A – 105A

Ricambi torcia taglio manuale allungato45A – 70A – 85A – 105A

Ricambi torcia taglio automatico45A – 70A – 85A – 105A – 125A

Ricambi torcia scriccatura45A – 70A – 105A

Ricambi torcia taglio manuale Aironcut45A – 70A – 105A

Filtro aria AT1000E' fortemente consigliato per evitare l'ingresso di umidità nella torcia.E' disponibile come ricambio la cartuccia filtrante interna.

Plasma Wecut105Manual torch 75°

Plasma Wecut105Manual torch 90° 130cm

6mt Easyfit coaxial cablePossibility of connecting two 6-metre cables for a total length of 12 metres

FlatWecut, for horizontal cutsConvenient one-piece cartridgeAvailable in 40-70A e 85-105A sizes

AironWecut KitTo cut in hard-to-reach areas.Convenient cartridge with spare parts available in 20-45A, 70A and 100A sizes.

Trolley 02

Bevel tool kitBevel and circular cuts

Compass

Consumables Starter kit, available in two sizes

45-70A

85-105A

Manual-cut torch spare parts 45A – 70A – 85A – 105A

Manual-cut torch spare parts (extended) 45A – 70A – 85A – 105A

Machine-cut torch spare parts 45A – 70A – 85A – 105A – 125A

Gauging torch spare parts 45A – 70A – 105A

Aironcut manual-cut torch spare parts 45A – 70A – 105A

AT1000 Air filterIt is strongly recommended to avoid moisture entering the torch.The internal filter cartridge is available as spare part.

Torcia Plasma Wecut105
Taglio manuale 75°

Torcia Plasma Wecut105
L130cm, taglio manuale 90°

Cavo coassiale Easyfit 6mt

Collegabile in serie con un altro da 6mt per un totale di 12mt

FlatWecut, per taglio orizzontale
Pratica cartuccia preassemblata in un unico pezzo
Disponibile nelle taglie 40-70A e 85-105A

Kit AironWecut
Per tagli in zone difficilmente raggiungibili.
Pratica cartuccia con ricambi disponibili nelle taglie 20-45A, 70A e 100A

Kit bevel tool
Per tagli obliqui, cianfrinatura e tagli circolari

Ricambi torcia taglio manuale
45A – 70A – 85A – 105A

Ricambi torcia taglio manuale allungato
45A – 70A – 85A – 105A

Ricambi torcia taglio automatico
45A – 70A – 85A – 105A – 125A

Ricambi torcia scriccatura
45A – 70A – 105A

Ricambi torcia taglio manuale Aironcut
45A – 70A – 105A

Filtro aria AT1000
E' fortemente consigliato per evitare l'ingresso di umidità nella torcia.
E' disponibile come ricambio la cartuccia filtrante interna.

Plasma Wecut105
Manual torch 75°

Plasma Wecut105
Manual torch 90° 130cm

6mt Easyfit coaxial cable

Possibility of connecting two 6-metre cables for a total length of 12 metres

FlatWecut, for horizontal cuts
Convenient one-piece cartridge
Available in 40-70A e 85-105A sizes

AironWecut Kit
To cut in hard-to-reach areas.
Convenient cartridge with spare parts available in 20-45A, 70A and 100A sizes.

Bevel tool kit
Bevel and circular cuts

Manual-cut torch spare parts
45A – 70A – 85A – 105A

Manual-cut torch spare parts (extended)
45A – 70A – 85A – 105A

Machine-cut torch spare parts
45A – 70A – 85A – 105A – 125A

Gauging torch spare parts
45A – 70A – 105A

Aironcut manual-cut torch spare parts
45A – 70A – 105A

AT1000 Air filter
It is strongly recommended to avoid moisture entering the torch.
The internal filter cartridge is available as spare part.